Specifications

B-24 Chapter 4: Other G-II Changes

Midas Digital Consoles

Addendum B

Item Element Function

1 MODE button Selects the routing configuration. Audio routing

paths are illustrated by item 18.

2 Band selection

indicator

Shows the selected routing configuration mode.

3 Limit curve Shows the minimum cut/maximum boost EQ

response for the selected band.

4 Dynamic curve Shows the real time dynamic EQ response curve.

This curve will vary between flat (no EQ) and the

outer curve (full EQ) depending on the signal level,

ratio and threshold settings.

5 IN button and LED

indicator

Switches the individual band on/off.

6 comp/exp meter Shows the current cut/boost of the selected EQ band.

7 LSN button and

LED indicator

Sidechain listen button that routes the bandpass

filtered sidechain signal to the unit output.

8 EQ type Selects the type of equaliser (shown in item 9) from

Bell, Low Shelf, High Shelf and Full Band.

9 Name field Shows the currently selected EQ type.

10 WIDTH control

knob

Sets the bandwidth of the EQ band and sidechain

filter for the selected band.

1 2 3

875 6

121314