Specifications

B-32 Chapter 4: Other G-II Changes
Midas Digital Consoles
Addendum B
There is also an amber condition, which means that the item(s) is in error, but is not
contributing to the audio.
About the Diagnostics Inspector window
Clicking an item in the Diagnostics screen will open its Diagnostics Inspector
window, which provides detailed information, particularly if the item has an error
condition.
Typical PRO Series Diagnostics Inspector window with the ‘ignore’ buttons at the
lower right corner
The ‘ignore’ buttons of the Diagnostics Inspector window let you configure the
PRO Series to ignore errors on selected/all items. This is an important feature
because there may be times when you are quite happy to work with a known
error(s), but will want to know when a new error occurs.
Note: Diagnostic Inspector windows are primarily for use by Midas service and
software engineers. By providing useful information, such as device health and status,
they aid fault diagnosis and rectification, and may help solve any problems that may
arise. Apart from using the ‘ignore’ buttons, it is unlikely that operators of the DL251/
DL252 Audio System I/O will ever need to use this function.
An example of DL271 DSP Board Diagnostics screen
An example of DL251 device Diagnostics screen showing an error condition
>> To ignore/unignore error condition
Click the desired item that is in an error condition and then click IGNORE/UNIGNORE
SELECTED. Its text colour should change to black to show that it is being ignored.
Click IGNORE/UNIGNORE SELECTED again to highlight the error condition.