Specifications

Preferences screen updated B-35
Midas Digital Consoles
Addendum B
The new User tab
The User Interface section of the User tab (Preferences User screen) lets you set
some of the consoles’ operating parameters to suit your own preferences.
Table 1: Overview of alterations to User Interface section
The following describes the User Interface options that
are new or have been altered on the consoles.
• Input Select Follows Solo — when you solo an input
channel, such as an aux return, this channel is
automatically selected.
• Output Select Follows Solo — when you solo an
output channel, such as a matrix, this channel is
automatically selected.
• Touch Navigation of Detail Area — choose this
option to navigate the local detail area on the control
surface to the GUI detail area when one of its
touch-sensitive controls is operated.
• Send Pan Follows Channel Pan — if a channel is contributing to a stereo mix bus
(for example, stereo aux channel), choosing this option will cause the pan for the
contribution to mirror that of the channel pan.
• Use Global Tap as Global Meters Pre — choose this option to change the tap
function to operate as a global meters pre button.
• Flash Global Tap Continuously — choose this option so that the tap button will
flash to reflect the current global tap tempo; this value is always displayed (in
milliseconds) in the tap tempo section at the top of the GUI screen.
• Collapsed Flip (Hide Unassigned Channels) — choose this option so that only
channels assigned to a mix bus will be visible when flipped to that bus. This affects
solo, such that any AFL solo is derived post- the aux send contribution level (and its
pan if applicable).
Option PRO1
PRO2 and
PRO2C
PRO Series
(PRO3, PRO6
and PRO9) XL8
Display Rotary Values Existing Existing Existing Existing
Fast Zone Delay Control Existing Existing Existing Existing
Input Select Follows Solo Existing Was “Select
Follows Solo”
Was “Select
Follows Solo”
Was “Select
Follows Solo”
Output Select Follows Solo Existing Was “Select
Follows Solo”
Was “Select
Follows Solo”
Was “Select
Follows Solo”
Automate Paging Existing Existing Existing Existing
Touch Navigation of Detail Area Existing Existing New New
Send Pan Follows Channel Pan Existing Existing New New
Use Global Tap as Global Meters Pre Existing Existing New New
Flash Global Tap Continuously Existing Existing New New
Collapsed Flip (Hide Unassigned
Channels)
Existing Existing New New