Operation Manual

Mixes 269

PRO1 Live Audio System

Operator Manual

Mixes

Each input channel can send an individually controllable contribution to each of the 16

aux buses (aux sends) and eight matrix buses (mtx sends). The contributions to the

buses are controlled by mix controls that give continuous adjustment (in the range

+6dB to off). The controls in the mix fader bay include level/pan and level control

knobs, with the pan control coming into operation when the corresponding bus is stereo

linked to its neighbour.

The mix section in the channel processing area controls a bank of eight buses per

selected input channel and this layout is replicated in the GUI channel strip.

Item Description

1 Aux/matrix buttons to activate flip on the channel faders.

2 clear button, cancels flip.

3 Quick access button for assigning the mix sends to the GUI channel

processing area.

4 ON switches, switch bus assignment on/off.

5 PRE buttons; when on, signal is pre-fader.

6 After a input channel has been selected to the channel strip, level/pan and

level control knobs offer control of relative contribution levels onto the

active buses. level/pan operates odd numbered controls, while level

operates the even ones.