Operation Manual

144 Chapter 17: Control Groups

PRO2 Live Audio System

Owner’s Manual

VCA groups

There are eight VCA groups, which are accessible via the mix fader LCD select buttons

when configured for VCA operation.

VCA groups on the control surface and GUI

Item Description

1 LCD select button, selects the VCA group and is also used for group

member assignment.

2 VCA group control, adds its level control on top of the local channel fader

controls of the group members.

3 SOLO button activates signal routing from all assigned channels to the

monitor A section of the control centre. It is used to monitor the VCA

master faders by creating a mix on the solo buses, which consists of all

input channels and audio mix groups that are assigned to control from

corresponding VCA masters.