Operation Manual

186 Chapter 22: Events (Automation)

PRO2 Live Audio System

Owner’s Manual

About the Edit Event window

You can edit the parameters of an event in the Edit Event window.

Figure 15: Edit Event window

Item Description

1 Disable Event tick box, for choosing whether the event is missed out

(skipped) during a rehearsal.

2 TEST EVENT button, for executing the selected outgoing MIDI or GPIO

event using the current event parameters.

3 When... section for selecting the parameters that trigger the event.

Displays either one or three drop-down lists, depending on the whether the

event is selected as Outgoing or Incoming, respectively.

4 Time Offset section, for setting the period of time that the event happens

after it has been triggered. Zero = no offset.

5 Then do this... section, for choosing the type of event that you want.

6 Event Parameters section (see the “Programming events” on page 187).

7 CLOSE button, for closing the Edit Event window.

8 Incoming/outgoing selection section, for selecting whether the event is

triggered on the PRO2 or on an external device.

9 Text field, for displaying the user-configured event name.