Operation Manual

Crossfade groups 195

PRO2 Live Audio System

Owner’s Manual

Note: The graph display shows the current longest crossfade in progress. So, if a

delayed crossfade starts during the current one, and it is longer than the current one,

the graph will change to show the new crossfade.

You can manually override the crossfade using the controls in the automation section of

the output bay (see “Manually controlling a crossfade” on page 198).

Crossfade groups

Crossfade groups let you choose which channels/buses/groups will contain the

crossfade. These groups are managed at the GUI’s Crossfade Groups screen.

Crossfade Groups screen

Item Description

1 Crossfade control group member source panel. Contains panels of

channels, buses and groups from where you select the sources for your

crossfade group.

2 Crossfade group management section, where you can create new crossfade

groups or delete existing ones, add/remove members to/from the currently

selected group, and select the desired group from the Control Group List.

3 Crossfade group member panel.

4 ADD and REMOVE buttons. These buttons add or remove the currently

selected members to or from the Control Group Member List,

respectively.

5 New, Rename and Delete buttons. These buttons let you create, rename

or delete crossfade control groups, respectively.

6 Control Group List, which shows the existing crossfade control groups.

7 Control Group Member List, which shows the current members of the

selected crossfade control group.

8 ALL and NONE buttons. These buttons select all or none of the members

in the Control Group Member List, respectively.

1 23