Operation Manual

237
PRO2 Live Audio System
Owner’s Manual
Chapter 30: Input Channels
By default, all of the input channels are mono, although any two adjacent channels (odd
left and even right) can be linked to form a stereo pair. The order of processing in the
signal path of both channel types is basically the same.
The order of the descriptive sections in this chapter loosely follows the signal path taken
by the input channels. However, this varies according to signal processing order and
the operation of certain controls.
Input channel routing
The diagram right shows the default
signal path, on which the structure of
this chapter is based. This chapter will
explain each of these groups of
controls, showing the pertinent controls
on both the control surface and GUI.
Order can be
swapped by
pressing the
C/O button (see
page 247)
Mic splitter remote controls
(see page 244)
Channel configuration
(see page 242)
Gain and filter controls
(see page 244)
Direct output
(see page 248)
Gate
(see page 254)
Compressor
(see page 250)
Insert controls
(see page 256)
Equaliser
(see page 257)
Aux controls
(see page 259)
Matrix controls
(see page 259)
Master controls
(see page 261)