Operation Manual

Solo, mute and fader 263

PRO2 Live Audio System

Owner’s Manual

Solo, mute and fader

Each input fast strip contains the MUTE and SOLO buttons motorised fader. The fader

is replicated in each input fast strip on the GUI and also in the masters detail area (GUI

channel strip). The fader controls the channel signal level and provides instant

feedback of level settings.

Item Description

1 LCD select button.

2 MUTE button, mutes all post-processing signals exiting the channel. In

addition to scene recall, it can also be remotely muted from the auto-mute

masters.

3 SOLO button, activates signal routing to the monitor A or B section of the

control centre (depending on the status of the solo B button) by sending

the input channel signal to PFL mono and AFL stereo buses. The solo

system is auto-cancelling, so that each new solo cancels the last one. Input

solos override any active VCA and bus solos.

This button is a latching type. Give a short press to latch it and a long

press to self-cancel when it is released.

4 Solo B button (GUI only), changes the operation of the SOLO switch so that

it routes signals to the monitor B section of the control centre.

5 Motorised fader.