Operation Manual

Troubleshooting automation 325
PRO2 Live Audio System
Owner’s Manual
no next scene Automation There is no next scene
relative to the current
position in the scene list.
This is generated by recalling
the next scene when the
current scene is the last in
the scene list.
Avoid this operation on the
last scene in the cue list.
no previous scene Automation There is no previous scene
relative to the current
position in the scene list.
This is generated by recall
the last scene when the
current scene is 00.00, that
is, the safe scene.
Avoid this operation on the
safe scene.
no scene data Automation The scene contains no scene
notes or MIDI data.
Only carry out this type of
operation on a scene that
contains scene notes or MIDI
data.
no show loaded Automation There is no show loaded. Only carry out this type of
operation with a show loaded.
not in storing
state
Automation The Automation System was
momentarily unable to store
a scene.
Try again. If repeated
attempts fail, contact Midas
Technical Support.
null pointer File and
Automation
Critical internal error. This is an indication of a
serious error. Contact Midas
Technical Support.
p
persistent storage
error
File and
Automation
The GUI or one of its
subsystems is out of date and
cannot interpret the new
failure modes.
Update the GUI and its
subsystems.
If the problem persists,
contact Midas Technical
Support.
point scene index
continuity error
File and
Automation
The show file being modified
is damaged.
This is an indication of a
serious error. Contact Midas
Technical Support.
point scene index
integrity error
File and
Automation
The show file being modified
is damaged.
This is an indication of a
serious error. Contact Midas
Technical Support.
point scene insert
error
File and
Automation
Failed to insert a point scene. This is highly unlikely to occur
in practice, but is an
indication of a serious error.
Contact Midas Technical
Support.
portable scene
format conversion
error
Automation The attempt to load a show,
which was last saved by an
MC built with a different
enum version, failed during
the scene conversion stage of
the loading process.
Try again. If repeated
attempts fail, contact Midas
Technical Support.
Error Message System(s) Problem Solution