Operation Manual

GEQs 541
PRO2 Live Audio System
Owner’s Manual
GEQs
You can copy the control settings of any of the GEQs through scenes. Only the Recall
Scope and Store Scope options in the Sections area of the Show Editor screen are
applicable to this option.
Effects
With only the internal effects unit(s) selected, the unit type and control settings of the
desired effect(s) are copied through scenes. In addition, if the Routing option
(Sections area of the Show Editor screen) is selected, the input patching is also
copied through scenes.
Item Control Parameter
1 31 faders Fader positions
2 High pass filter control
knob
High pass filter cut off frequency
3 IN switch High pass filter in/out
4 Low pass filter control
knob
Low pass filter cut off frequency
5 IN switch Low pass filter in/out
6 EQ switch EQ in/out
7 SLOPE switch Low pass filter: 6dB or 12dB
8 Q switch Q mode as proportional (PROP.) or constant
(CON.)
9 IN switch 200Hz - 20kHz notch filter in/out
10 Notch filter control
knob
200Hz - 20kHz notch filter frequency
11 IN switch 20Hz - 2kHz notch filter in/out
12 Notch filter control
knob
20Hz - 2kHz notch filter frequency
13 SLOPE switch High pass filter: 6dB or 12dB
2
3
1
4
5
6
7
89
1011
1213