Operation Manual

Using the I zone to control an internal effect/GEQ 191
PRO Series Live Audio Systems
Owner’s Manual
>> To operate the assignable controls panel at the master bay GUI
You can use the GUI to operate the effect/GEQ assigned to the I zone by doing any of
the following:
Rack and unit control navigation
The assignable controls panel on the control surface has four navigational buttons
that let you select a rack unit on the GUI and choose which of its page/group of controls
are assigned to the I zone.
Table 13: I zone navigation button functions
4 Effects only: Description of the effect’s button currently assigned to the
button.
GEQ only: Will show either the text “zoom n” (where n is number from 1 to
8) or “overview” to indicate which display you are in, that is, overview or
zoom, respectively.
5 Navigation buttons, which replicate the arrow buttons in the I zone (see
Table 13 below).
6 Parameter description of the assignment of the overlying control knob.
7 Control knob. Includes gradations and dimensions applicable to the
assigned parameter.
8 When an I zone control is unassigned, it is displayed as a ‘ghost’ image.
(This also applies to the buttons.)
To
Do this in the assignable controls
panel
Select a different effect/GEQ Click the up/down arrow buttons
Change the I zone control assignments Click the left/right arrow buttons to
navigate to a different page (effects) or
zoom display (GEQs)
Operate a button on the front panel of an
effect/GEQ
Click the desired LCD button
Operate a control knob on the front
panel of an effect/GEQ
Use drag on the desired control knob
Control
button
Does this when controlling
the effects
Does this when controlling
the GEQs
Left arrow Scrolls through the ‘pages’ of
the selected internal effect in
descending order. This has no
effect if you are already at the
first page or there is no effect
selected.
In zoom view, scrolls through
the zoom displays. This has no
effect if you are already at
‘zoom 1’ display.
This has no effect in overview
display.
Up arrow Scrolls up the effects rack,
changing unit selection
accordingly. Stops at the top
rack position.
Scrolls up the GEQ rack,
changing unit selection
accordingly. Stops at the top
rack position.
Item Description