Operation Manual

222 Chapter 22: Events (Automation)

PRO Series Live Audio Systems

Owner’s Manual

Connecting up the MIDI/GPIO equipment

The PRO Series has a set of MIDI sockets on the rear panel for connecting MIDI

equipment (see “MIDI section” on page 268). There is also an equivalent set on the

rear panel of the I/O boxes.

GPIO connections for the PRO Series are via the rear panel of the DL351 Modular I/O

and DL451 Modular I/O. The PRO Series Control Centre doesn’t have any GPIO

connections.

About the Edit Event window

You can edit the parameters of an event in the Edit Event window and even change its

name.

Figure 25: Edit Event window

Item Element Function

1 Disable Event tick

box

For choosing whether the event is missed out

(skipped) during a rehearsal.

2 TEST EVENT

button

For executing the selected outgoing MIDI or GPIO

event using the current event parameters. (Outgoing

events only.)

3 When... section For selecting the parameters that trigger the event.

4 Time Offset

section

For setting the period of time that the event happens

after it has been triggered. Zero = no offset.

5 Then do this...

section

For choosing the type of event that you want.