Operation Manual

298 Chapter 30: Inputs

PRO Series Live Audio Systems

Owner’s Manual

Insert

Input channel insert section provides a send and return out of the signal path, primarily

so that an effects device can be added to the signal’s processing. The send destination

and return source may only be set from the GUI screen, although the INS switch can

be found on both the GUI and also in each input fast strip. This section is optional and

assigned on a channel-by-channel basis.

Insert controls for the input channels on the control surface and GUI

Item Control Function

1 INS switch Connects (inserts) returned programme material to

the channel signal path, provided both the insert send

and insert return points haves been assigned.

2 insert return field Shows you the source of the insert return.

3 insert send field Has a drop-down list, which shows the destination(s)

of the insert send.

4 assign LED Green LED that illuminates to show that an insert

return point is patched.

5 dest button Opens the Patching screen from where you can

select the destination of the insert send.

6 source button Opens the Patching screen from where you can

select the source of the insert return.