Operation Manual

About the updater screen 409
PRO Series Live Audio Systems
Owner’s Manual
Each device block on the updater screen represents a possible or actual device
connected in the system. The number inside the device block is the device’s ID, and
the colour of each device block indicates its update status. The following table explains
what each device block condition represents.
Table 23: Description of the updater screen device blocks
9 Status bar This green bar shows the progress of the current task
in the update procedure, as indicated by the text
immediately above.
10 Device area This area contains device blocks that each represent
an item of equipment in the PRO Series Live Audio
System.
11 Unit Status
window
This window, which opens when you move the pointer
over a device, gives you detailed information on the
device’s update progress.
12 Text Window name followed by device update status
information.
13 Text Detailed file information and installation status.
14 Text Shows the build that the device will be updated to.
Device block Description
Grey background — appears during the updater’s ‘triggering
upgrade client’ procedure. If its appearance doesn’t change
throughout the update procedure, either there is no device
connected in this position or one has not been detected.
Blue background without roundel — appears after the updater’s
‘triggering upgrade client’ procedure has finished to show you that
there is a device connected in this position.
Dark blue background with roundel — appears after this device
has been selected for update.
Gold background with roundel — this device is currently being
updated.
Green background — this device has successfully been updated.
Red background — this device’s update has failed.
This is an I/O device block, which has the unit type at the top.
Item Element Description