Operation Manual

Diagnostics 395
PRO Series Live Audio Systems
Owner’s Manual
There is also an amber condition, which means that the item(s) is in error, but is not
contributing to the audio.
Viewing the status of the master controllers is particularly important, especially when
you wish to swap the active master controller (see “Swapping the active master
controller” on page 396), as it shows you which master controller is currently
controlling the network.
About the Diagnostics Inspector window
Clicking an item in the Diagnostics screen will open its Diagnostics Inspector
window, which provides detailed information, particularly if the item has an error
condition.
Typical Diagnostics Inspector window with the ‘ignore’ buttons at the lower right
corner
The ‘ignore’ buttons of the Diagnostics Inspector window let you configure the
PRO Series to ignore errors on selected/all items. This is an important feature
because there may be times when you are quite happy to work with a known
error(s), but will want to know when a new error occurs.
Note: Diagnostic Inspector windows are primarily for use by Midas service and
software engineers. By providing useful information, such as device health and status,
they aid fault diagnosis and rectification, and may help solve any problems that may
arise. Apart from using the ‘ignore’ buttons, it is unlikely that operators of the PRO
Series Control Centre will ever need to use this function.
State Description Unit status
Connection of
active link
Connection of
inactive link
Both the unit and
link are green
Good Good Good
Unit is green and
the link is red
Good Bad Not known
Unit is red and the
link is green
Malfunction Good Not known
Both the unit and
link are red
Not known Bad Bad