Operation Manual

Stereo returns 63

VeniceF

Operator Manual

Stereo returns

There are two stereo returns that route to masters, certain groups and the two monitor

buses.

Stereo returns 1 and 2 on the rear panel. Each return has left and right TRS 1/4” TRS

Jack sockets.

The stereo returns section is immediately below the firewire output select section.

stereo returns section

Item Description

1 return 1 and return 2 control knob These control knobs adjust the line

gain from

4 (infinity/off) to +20dB.

2 MUTE switch and red LED These switches mute the stereo returns. The

LEDs illuminate to show that the mute is on.

3 SOLO switch and yellow LED These switches route the stereo return

signal to the mono PFL bus and stereo AFL buses. The LEDs illuminate to

show that the solo is on.

4 group 1-2 and group 3-4 switches Routes the stereo return channels

to groups 1 and 2 (return 1) or 3 and 4 (return 2).

5 stereo master switch Routes each stereo return to the stereo master

channel.

6 monitor 1 and monitor 2 control knob Adjusts the contribution to the

monitor 1 and 2 buses (pre-fade or post-fade mono sum) from

4 (infinity/

off) to +6dB.