Operation Manual

32 Chapter 5: Mono Input Channel

VeniceF

Operator Manual

Overview of the mono input channel

Each mono channel has an XLR input that can be used for mic or line

level signals up to +32dBu. An additional 1/4” inch TRS Jack socket,

provides an input for line level signals that require protection against

accidental 48-volt connection. The line input gives 10dB of permanent

attenuation to the input signal, which allows the connection of extremely

high line level signals of up to +42dBu with the pad engaged.

Item Section

1 Gain (see “Gain” on page 34)

2 FireWire and direct output section (see “FireWire” on

page 35)

3 Insert and EQ (see “Insert” on page 35 and “EQ” on page 36)

4 Monitor and aux contributions (see “Monitors” on page 37

and “Auxes” on page 38)

5 Pan and routing (see “Pan, routing, mute and solo” on

page 39)

6 100 mm fader and meter (see “Fader and meter” on page 41)