Operation Manual

Auxes 65

VeniceF

Operator Manual

Auxes

There are four independent aux outputs on the rear panel.

Four aux XLR outputs on the rear panel

FireWire output is available for the auxes by the overriding dual stereo input channels

25-26 and 27-28. For more information, see “FireWire” on page 58.

Each aux output is controlled by a discrete section on the control surface.

Auxes on the control surface

5 MUTE switch and red LED The MUTE switch mutes the monitor send

output signal. The mute LED illuminates to show that the mute is on.

6 SOLO switch and yellow LED The SOLO switch routes the monitor send

signal to the mono PFL bus and stereo AFL buses. When the SOLO switch is

on, the master meters are automatically used for solo metering. The solo

LED illuminates to show when solo is on.

Item Description

1 Control knob Adjusts the aux master level. The output level of the aux is

continuously variable from

4 (infinity/off) to +10dB.

2 MUTE switch and red LED The MUTE switch mutes the aux send signal

at every point after the master send level. The LED illuminates to show

when the mute is on.

3 SOLO switch and yellow LED The SOLO switch routes the aux send

signal to the mono PFL bus and stereo AFL buses. The solo LED illuminates

to show when solo is on.

Item Description