Operation Manual

19
VeniceU
Operator Manual
Chapter 3: Using The VeniceU With
USB
This chapter shows you how to prepare your PC/Mac® for USB operation. The VeniceU
console has been tested and verified for USB use with the following computer operating
systems: a PC running Windows® 7 and a Mac running OS® X (version 10.7 or later).
However, we cannot guarantee correct USB operation on any other computer
operating system.
All of the files that you should need for USB operation on the VeniceU, such as, drivers,
recording templates, demos, etc., will be on the USB memory stick supplied with the
console. They should also be available for download from the www.midasconsoles.com
website.
For information on how to use USB with the ‘bundled’ recording software, refer to the
Software Application Guide (part number DOC04-VNUAPPLICATION).
Windows 7 operating system
This section shows how to install and set up USB on a PC running the Windows 7
operating system.
>> To install the USB device driver on your PC
Do not connect the USB cable to the PC before installing the device driver.
Important:
Before installing the USB device driver from the VeniceU USB memory stick,
we recommend that you make sure it is the latest version by checking the
www.midasconsoles.com website. This is important, as you may not be able
to use USB operation properly with an older version of the device driver.
1 The USB device driver software is on
the VeniceU USB memory stick. Plug
the VeniceU USB memory stick into
your PC. (Depending on your PC’s
configuration, an AutoPlay window
may open. If so, select the Open
folder to view files option and then
click OK.)
2 On the USB memory stick, double-click the “setup.exe” file in the
“Midas_VeniceU_USB_Drv_Vx_xx_x” folder (where “Vx_xx_x” is the USB driver
version) to start the setup wizard.