User manual

24
XL48 Microphone Pre-amplier
7. Using The XL48
To avoid electrical shock, never operate the equipment with the covers removed.
Do not operate the equipment or any of its parts if safety guards are ineective or
their eectiveness has been reduced.
When the unit is rst powered up it will be set to 96 kHz using the internal clock
(factory default setting). When a change is made to the sample rate and clock
setting it will remain stored during a power cycle. For example, if you always
want the unit set at 48 kHz and using an external clock source, you don’t have set
up these options each time the unit is power cycled.
8. Technical Specications
© 2012 MUSIC Group IP Ltd. Technical specications and appearances are subject
to change without notice and accuracy is not guaranteed. MIDAS and KLARK
TEKNIK are part of the MUSIC Group (music-group.com).
XL48 general specications
Dimensions 1U high (<43.6 mm) Rack 482.0 mm
(19") wide <325 mm deep
Net weight 5.5 kg
Shipping weight 6.5 kg
Power requirements 100 V to 240 V AC ±10%, 50 to 60 Hz
Power consumption at 115 V <35 W
Power consumption at 230 V <35 W
Operating temperature range +5° C to +40° C
Storage temperature range -20° C to +60° C
XL48 audio electronic specications
Maximum input level Mic/line Mic/line + pad +11 dBu +31 dBu
CMR at 1 kHz (typical)
Mic (gain +40 dB) Mic +
pad (gain +40 dB)
>80 dB >70 dB
Noise
Mic EIN at 60 dB gain
Mic EIN at 40 dBgain
Output noise at
minimum gain
-128 dBu
-125 dBu
-95 dBu
Frequency response 20 Hz to 20 kHz +0 dB to -1 dB
Distortion at 1 kHz Input to output (0 dB) 0.01%
Crosstalk at 1 kHz Channel to channel <-90 dB
Maximum output level Line outputs (into 600 R) +21 dBu
Digital output
Sampling frequency
Bit rate Dynamic
range (20Hzto 20 kHz)
96 kHz, 88.2 kHz, 48kHz
or 44.1 kHz 24-bit
only >113dB
midasconsoles.com