Manual

ManualsBrandsMiddle Atlantic ManualsComputersCorner Video Desk w/ 1-Piece Overbridge

I-02351 Rev I

MDV SERIES

MDV-CNR1

Corner Desk With Overbridge

Instruction Sheet

THANK YOU

Thank you for purchasing the MDV-CNR1 Corner Desk with Overbridge. Please read these

instructions thoroughly before assembling this product.

PRODUCT FEATURES

- Attractive corner desk features a durable graphite top.

- Designed for installations in conjunction with the MultiDesk Video™

side bay rack.

- Configurable overbridge provides up to 4 rackspace

mounting locations.

Summary of content (4 pages)

PAGE 1
Instruction Sheet MDV SERIES MDV-CNR1 Corner Desk With Overbridge THANK YOU Thank you for purchasing the MDV-CNR1 Corner Desk with Overbridge. Please read these instructions thoroughly before assembling this product. PRODUCT FEATURES - Attractive corner desk features a durable graphite top. - Designed for installations in conjunction with the MultiDesk Video™ side bay rack. - Configurable overbridge provides up to 4 rackspace mounting locations.
PAGE 2
TOOLS REQUIRED FIGURE A #2 Phillips Head Driver ASSEMBLY ADJUST LEVELING FEET AS NEEDED 1) Attach the brackets to the desk as shown using the large screws (7 screws per leg). (FIGURE A) 2) Insert the legs into the brackets, aligning the set the screw opening in the leg with the opening in the bracket. (FIGURE A) SETSCREW OPENING LEG 3) Tighten all brackets using the enclosed hex key by turning the set screw 3/4 turn clockwise. BRACKET NOTE: Do not overtighten.
PAGE 3
ASSEMBLY (Continued) FIGURE C BACK NOTE: The arrow points toward the stud. (Indicates unlocked position) 7) Install the studs into the desktop holes for the overbridge configuration desired. (FIGURE C) DESKTOP NOTE: The black plastic hole plugs are provided to fill the open holes. STUD FIGURE D OVERBRIDGE BOTTOM 8) Install the studs in the overbridge bottom for the desired overbridge configuration.
PAGE 4
WARRANTY Middle Atlantic Products (the "Company") warrants the MDV-CNR1 to be free from defects in material or workmanship under normal use and conditions for a period of (7) years from the date of shipment by the Company.