Commercial Microwave Oven INSTRUCTION MANUAL Model: 1834G1A Model: 2134G1A Read these instructions carefully before using your microwave oven, and keep it for reference If you follow the instructions, your oven will provide you with many years of dependable service.
CONTENTS IMPORTANT SAFEGUARDS PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS RADIO INTERFERENCE SAFETY 3 3 5 6 6 BEFORE THE FIRST USE UTENSILS 7 PARTS & FEATURES NAMES OF PARTS & ACCESSORIES 9 10 11 INSTALLATION CONTROL PANEL OPERATION INSTRUCTION 12 13 14 USER OPTION DEFAULT COOK TIMES FUNCTION INSTRUCTION CLEANING & MAINTENANCE CLEANING INSTRUCTION 21 MAINTENANCE Specifications Model: Rated Voltage: Rated Input Power: Rated Voltage: Rated Input Power: 1834G1A 208/230V~
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. (b) Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces. (c) Do not operate the oven if it is damaged.
IMPORTANT SAFETY INSTRUCTIONS 9. This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment. 10. Do not cover or block any openings on the appliance. 11. Do not store this appliance outdoors. Do not use this product near water - for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location. 12. Do not immerse cord or plug in water. 13. Keep cord away from heated surface. 14.
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING - Improper use of the grounding can result in a risk of electric shock.
RADIO INTERFERENCE 1. Operation of the microwave oven may cause interference to your radio, TV or similar equipment. 2. When there is interference, it may be reduced or eliminated by taking the following measures: 1) Clean door and sealing surface of the oven. 2) Reorient the receiving antenna of radio or television. 3) Relocate the microwave oven with respect to the receiver. 4) Move the microwave oven away from the receiver.
10. To prevent delayed eruptive boiling of hot liquids and beverages or scalding yourself, stir liquid before placing the container in the oven and again halfway through cooking time. Let stand in the oven for a short time and stir again before removing the container. 11. Use care when cooking food in the microwave oven to avoid burning due to excessive cooking. 12.
Materials you can use in microwave oven UTENSILS Aluminum foil Browning dish Dinnerware Glass jars Glassware Oven cooking bags Paper plates and REMARKS Shielding only. Small smooth pieces can be used to cover thin parts of meat or poultry to prevent overcooking. Arcing can occur if foil is too close to oven walls. The foil should be at least 1 inch (2.5cm) away from oven walls. Follow manufacturer* instructions. The bottom of browning dish must be at least 3/16 inch (5mm) above the turntable.
SETTING UP YOUR OVEN Names of Oven Parts and Accessories Remove the oven and all materials from the carton and oven cavity.Your oven comes with the following accessories: Instruction Manual 1 A C E B D A) Control panel and Display B) Observation window C) Door assembly D) Safety interlock system E) Ceramic bottom plate Note: 1) Don't press the ceramic bottom plate forcibly. 2) Take and put the utensils gently during the operation in order to avoid damage to the ceramic bottom plate.
Countertop Installation Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film foundon the microwave oven cabinet surface. Installation 1. Select a level surface that provide enough open space for the intake and/or outlet vents(Figure1). Fig 1 12 inch(30cm) 4.0 inch(10cm) Fig 2 A B 4.0 inch(10cm) OPEN A 4.
CONTROL PANEL Control Panel and Features (7 7) (1) (6) (2) (3) (4) (5) (1) Power Buttons (3) Double Quantity Button (5) Start Button 11 (2) Time Entry Button (4) Stop/Reset Button (6) Number Keyboard (7)Display
OPERATION INSTRUCTION Five power levels are available. Level Power Display High M. High Med. Defrost PL10 PL7 PL5 PL2 100% 70% 50% 20% Appendix. A User Options Items bolded below are the default values.
OPERATION INSTRUCTION Appendix. B Default Cook Times The oven shall ship with the following Preset Cook Times unless otherwise noted in theproduct Specification.
OPERATION INSTRUCTION 1. Power Up 1) When the oven is plugged in for the first time, the screen will display " 230V TOUCH 1 208V TOUCH 2 ". 2) Choose the Voltage by pressing number button"1" or "2". Then screen will display "230V" or"208V" and "TOUCH START" will also display. 3) Press "START" to make the oven enter into Idle Mode. 2. Idle Mode 1) The oven shall enter Idle Mode after a period of time has expired in Ready Mode or Pause Mode without any operation.
OPERATION INSTRUCTION 5. Pause Mode 1) While cooking, if the door is opened and then closed, or if the "STOP" pad is pressed, the oven will enter Pause Mode. 2) While paused, the screen will display the remaining cooking time. 3) In Pause Mode, if the "STOP" button is pressed, the oven shall immediately enter Ready Mode; If the "START"button is pressed,the oven will go into working mode. 6. End of Cook Cycle Mode 1)When the cooking time has expired, the oven shall go into the End of Cook Cycle Mode.
OPERATION INSTRUCTION 8. Manual Cook Mode 1) In Ready Mode, press the "Time Entry" pad, the screen will display "00:00". 2) Press number buttons to input the cooking time. HOID Defrost 3) If you press "0% "," 20% ","Medium" or "Med-Hi" button to select power level, the 70% 50% screen will display the related power. If the same button pressed twice, the power will change to PL10. If no power chosen, "PL10" is default. 4) Press "START" to start cooking. Note: a.
OPERATION INSTRUCTION For example: set the program as memory cooking. Power level 70% and cooking time is 1 minute and 25 seconds. Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM " displays. Step 2: Press number button "3", 2 seconds later, the screen will display the time related. Step 3: Press number buttons "1", "2" and "5" to input the cooking time. The screen will display "1:25". Step 4: Press" Med-Hi " button , "1:25 70 "d isplays. Setting finished.
OPERATION INSTRUCTION a. Open the door,press number button "1" for 5 seconds,"PROGRAW" displays. b. Press number button "3", after two seconds, the screen will display the related time. c. Press "1","2","5" to input the cooking time. "1:25" displays. i d. Press " Med-H " button and " 1:25 70" displays. The first stage is finished. 70% e. Press " Time Entry", "STAGE-2" displays. f. Press "5", "4","0" button, "5:40" displays. Medium g. Press " 50% " button and "5:40 50 " displays. The second stage is finished.
FILTER INSTRUCTION How to remove and install the filter Turn the thumbscrews counterclockwise to loosen them. Take off the filter. To restall,align the base plate mounting holes, turn the thumbscrews clockwise to tighten .
How to remove and install the ceiling plate Warning:Before remove and install the ceiling plate,be sure to unplug the appliance from the power supply. thumb pressed here 1 hands with oil blockage ,pressed on the arrow shown,pushed back slamly,then pulling down. 1.Hands to take the oil blockage,,after alignment three cylinder of the oil blockage, inserting the three holes of the back plate. thumb pressed here 2.
Cleaning Instructions Always keep the oven clean 1. Cleaning the glass viewing window, the inner door panel and oven front face. For best performance and to maintain the high degree of safety, the inner door panel and oven front face should be free of food or grease build-up. Wipe these parts with a mild detergent, rinse and wipe dry. Never use abrasive powders or pads. 2. Cleaning the control panel and plastic parts.
or call the help center at 1-855-238-5604. damp with mild sanitizer. with cover e. Cook food covered. Call support center. with cover e. Cook food covered.
Installation(supplement) 1. The switching operation of this microwave oven can cause voltage fluctuations on the supply line. The operation of this oven under unfavorable voltage supply conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximum permissible system impedance Zmax of 0.2 Ohms at the interface point of the user’s supply.