Operation Manual

OPERATING INSTRUCTIONS
12
Display panel
Identification of parts
Indoor unit
DISPLAY PANEL:
Floor and standing type(console)
1
5
6
2
4
1
3
10
7
8
9
Indoor unit
Outdoor unit
7. Drain hose, refrigerant connecting pipe
8. Connective cable
9. Stop valve
10. Fan hood
1. Air flow louver (at air outlet)
2. Air inlet(with air filter in it)
3. Remote controller
4. Installation part
5. Display panel
6. Connecting pipe
OPERATION indication lamp
This indicator illuminates when the unit is
operational.
TIMER indication lamp
Lights up during Timer operation.
DEFROST indication lamp(Cooling & Heating
models only) or Fan only indication lamp
(Cooling only type):
Lights up when the air conditioner starts
defrosting automatically in heating operation
or fan only mode is selected.
Temporary button
This button is used to operate the unit
temporarily in case you misplace the remote
controller or its batteries are exhausted. One
press of the manual control button will lead to
the forced AUTO operation. If press the button
twice within five seconds, the unit will operate
under forced COOL operation. The forced
COOL operation is used for testing purposes
only, please do not choose it unless it is
necessary.
Infrared signal receiver
1
2
3
4
One-twin
One-three
One-four
One-five