User Instructions

) Close the door, the oven will turn back to Ready Mode.

If press " " button during setting process, the oven turn to Door Open Mode.

The program that not saved will be lost. If there is program saved as memory procedure,

press the related number button, the saved program will start. If no saved program,

the buzzer will alarm when pressing number button and it will not work.

For example: set the program as memory cooking.

Power level 70% and cooking

time is 1 minute and 25 seconds.

Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM" displays.

Step 2: Press number button "3", the screen will display "P:03",After two seconds,

Step 3: Press number buttons "1", "2" and "5" to input the cooking time.

Step 4: Press "7 " button," " displays. Setting finished.

Step : Press " " to save. When use the program next time, just press "3",

the related program will start.

Note:

1. If the electricity is cut off, the saved program will not lost.

2. If the program need to reset , just repeat the aboved steps.

3. If press " " at the last step, it will turn back to Ready Mode. The setting will be no use.

1:25 70

the screen will display the time " :30".related

2) If the "X2"

in Ready Mode, followed by the starting of a Preset

or if the "X2" button is pressed in 5 secondes of starting a Preset

start cooking with the quantity preset cooking time.

3) Press "X2", "DOUBLE" displays. When press number

quantity preset time.

For example, number button "5" and its preset time is 1 minute. Then press "X2", then time

will change to 1:00*2=2 (2 minutes)

4) When cooking program finish, the oven will enter End of Cook Cycle Mode.

or "X3" button is pressed

Program,

or " "X3

Program, the oven will

Press " "X3 , " "TRIPLE displays.

buttons,

the

screen

will

display

the

3. Double/ Triple Quantity cooking