User Instructions

(1)
(2) Press "USB" button to update the data of computer board. "LOADING"
(3) If the update is successful, the screen will display "SUCCESS". Otherwise, "Fail" will
(4) Press " " or open the door to finish it.
During Ready Mode, insert the U disk which saved the "Utable" file.
d
isplays.
display.
17. Use Option Mode
This allows the user choose between various ways for the oven to operate.
1) Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter
this mode.
2) displays "OP: - -".
3) Press any number button to enter related mode setting.
For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays.
If you want to change, keep pressing "2", displays "OP:20", "OP:21","OP:22",
"OP:23", "OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
5) During setting process, press " " to enter Door Open Mode. Close the door will enter
Ready Mode.
6) If " " button not pressed at the last step, the program cannot be saved but stay at
previous way.
the screen
The screen
16. USB Function
18. Factory-default setting
1) Press " " and " 0 ", the buzzer sounds once,and the screen wil l display "CHECK".
actory-default setting, will display
"
11
"
,after three seconds,
turn
ode
In the Ready Mode,pressing " " an
" 0 " to factory-default setting.
d
t
he oven
Press" " to cancel the display ang back to ready back in the
he factory-default setting, will display " 00 ", pr
e
ss" "
will display " CLEAR ".
2) If do not press " " when the display " 00 ",the setting will cancel.
the screen
the screen
screen
Note: actort-default setting operation restore all configure to f . Be careful in the as it will
the buzzer sounds once,
isplay " "11 or " "00 . d
setting, the screen
to the ready m
If not in t
in the f
If i t is
process
of display.
to the factory-default
after self-testing, the screen
will
20