User Instructions

The front filter serves as the air inlet; the filter

on time to keep the chamber

clean.

1. Turn counterclockwise to unscrew and take down

it with warm soap water;

2. Install the filter screen

Tighten clockwise the

screws to fix the filter ;

3. Make sure the filter is installed before use

of the microwave oven;

4. The factory setting has the function to remind the

user of washing the filter

(6) Splash shield cleaning

1. Detaching: Hold the two buckle positions in front of

hands (as shown by the

arrows). Exert your strength following the direction of

the arrows and pull downwards after you have pulled

out the buckles:

2. Wash the splash shield:

3. Installation: Pick up the splash shield and obliquely

put it into the chamber in

pin at the rear into the positioning hole on the rear

plate of chambe

, then push the other side to insert all

positioning pins into their

Caution! Make sure the splash shield is installed

correctly before use of the microwave oven!

Filter Filter screws

Filter cleaning

should be cleaned

the filter ; and wash

the splash shield with your

the way that insert the first

positioning holes.

every 30 days.