User Manual

 Page 10 
THERMOSTAT
The thermostat is used to set the desired room
temperature when the unit is being operated in the
COOL MODE.
To set the desired room temperature, rotate the
thermostat switch to the desired setting. After the
set temperature is achieved the thermostat will
automatically start and stop the compressor in order
to maintain the desired set temperature.
Rotate the thermostat selector clockwise for higher
cool settings. Higher cool settings will provide lower
room temperature. Rotate the thermostat selector
counter clockwise for lower cool settings. Lower cool
settings will provide higher room temperature.
COOL MODE
The desired cool setting is selected by rotating the knob
to the right to the desired position.
HIGH COOL has maximum cooling effect and airflow.
LOW COOL has minimum cooling effect and airflow.
FAN MODE
Rotate the knob to the left to select your choice of fan
speeds for air circulation.
NOTE: When selecting a fan speed, the compressor will
not run.
NOTE
The controls featured in this manual are representative of many available models.
Your model may offer slightly different features.
Unit Control (MAW05M1YWT)
Operating
Instructions