User Manual

6
OPERATION INSTRUCTIONS
1. Clock Setting
After connecting the oven to the power, the symbols " 0:00 " will be visible on the display.
1> Press "
", the hour gures will ash.
2> Rotate " K2 " to adjust the hour gures, (time should be within 0--23).
3> Press "
", the minutes will ash.
4> Rotate " K2 " to adjust the minutes setting, (time should be within 0--59).
5> Press "
" to nish the clock settings. " : " will ash, and the time will be illuminated.
Note: The clock is 24 hours. After power on, the clock will show " 0:00 " if not setting.
2. Function Setting
1> Rotate " K1 " to choose the cooking function you require. The related symbol will be illuminated .
2> Rotate " K2 " to adjust the temperature.
3> Press "
" to start the cooking.
4> Press "
" to start the cooking without step 2, and the default time is 9 hours and the default
temperature will display on the LED.
Note:
1> The step quantities for the adjustment time of the knobs are as follow:
0--0:30min: step 1 minute 0:30--9:00hour: step 5 minutes
2> The step quantities for the adjustment of temperature is 5C, this can be adjusted under all
cooking functions except "
" " " " " .
3> Rotate " K1 " to adjust the cooking time when cooking begins. Then press "
" to conrm.
If "
" not pressed within 3 seconds, the oven will revert back to the previous time to continue
cooking.
4> Rotate" K2 " to adjust the temperature when cooking begins. The related indicator will be
illuminated.
Then press "
" to start cooking. If "
" not pressed in 3 seconds, the oven will revert back to
the previous temperature to continue cooking.
3. Lamp Setting
1> Rotate " K1 " to select the relevant function, then the corresponding icon will be on.
2> Press "
" button to start, " 0:00 " and lamp icon " " will light up, " : " will ash.
4. Inquiring Function
In the following states, you can use inquiring function, after 3 seconds return to the current state.
1> During working state, if the clock was set, press "
" button to see the current time; if the
reminder function was set, press "
"( ) button to see the time of reminder.
2> In reminding state, if the clock was set, press "
" button to see the current time.
3> In clock display state, if the reservation function was set, press "
" button to see the time of
reservation.