Operation Manual

Lever
The starting angle of the horizontal louver should not be too small, or the narrow air
outlet will affect cooling or heating.
Do not move the vertical louver manually ,or it may malfunction during operation,
If the malfunction happens, please stop operating unpluge for several minutes then
plug again and restart.
Do not operate the air conditioner for long with the airflow direction set downward during
the cooling or drying operation. Otherwise, condensation may occur on the surface of
the vertical louver and cause dew dripping.
When the air conditioner restarts the vertical louver might not move for 10seconds or so.
At the first time to operate, there may be some noise when horizontal louver is turning, it
is under control.