Operation Manual

ManualsBrandsMidea ManualsAir ConditioningR05 Remote control

1.The outline figure on cover is for reference only, which

may differ from what you purchased.

2. Make sure to read chapter PRECAUTIONS before

you operate the air conditioner.

3. This manual is available for model R05/BG.

4. R05/BGE can be applicable for cool only type and

cool&heat type air conditioners.

NOTE

NOTE-CONTENTS

PRECAUTIONS.........................................................1

MODEL AND SPECIFICATION.....................................1

BUTTONS AND THEIR FUNCTIONS..............................2

INDICATORS AND FUNCTIONS....................................5

OPERATION INSTRUCTIONS.......................................6

CONTENTS

INSTALL AND REPLACE BATTERIES...............................6

AUTO OPERATION............................................................6

COOL/HEAT/FAN OPERATION..........................................6

DRY OPERATION.....................................................7

TIMER OPERATION...................................................7

Summary of content (5 pages)

PAGE 1
NOTE 1.The outline figure on cover is for reference only, which may differ from what you purchased. 2. Make sure to read chapter PRECAUTIONS before you operate the air conditioner. 3. This manual is available for model R05/BG. 4. R05/BGE can be applicable for cool only type and cool&heat type air conditioners. CONTENTS PRECAUTIONS.........................................................1 MODEL AND SPECIFICATION.....................................1 BUTTONS AND THEIR FUNCTIONS..............................
PAGE 2
PRECAUTIONS Set TIME ON and TIME OFF simultaneously Curtain, door or the like objects will prevent the remote signal from being received by air conditioner. 1. Set TIME ON according to procedures 1 and 2 specified in TIME ON operation. Do not get the interior of remote controller wet. It is forbidden to expose it to direct sunlight or locate it in the place with high temp. 2. Set TIME OFF as the procedures 1 and 2 specified in TIME OFF operation.
PAGE 3
NOTE: On FAN mode, temp is nonadjustable and ECO is BUTTONS AND THEIR FUNCTIONS ineffective. Procedure 2 is omitted. DRY operation 1. Press MODE to select DRY. 2. Adjust temp via and . Generally the range is 17 ~30 . AUTO 3. Press ON/OFF and running indicator light on indoor unit is COOL lightened. Air conditioner will work on DRY mode. Turn off the unit via ON/OFF. Mode setting TEMP SET DRY 1 2 Fan speed setting CLOCK HEAT SET HOUR 4. On DRY mode, ECO and FAN SPEED are unavailable.
PAGE 4
MODE: Once pressing, running mode will be selected in speed. AUTO, LOW, MED and HIGH can be selected. The the following sequence: AUTO COOL Fan speed: Press FAN SPEED to display the current wind DRY HEAT default state is high fan speed for the unit without medium FAN NOTE: No heating mode for cool only type unit. fan speed. Economic operation: This icon will be lightened or off when FAN SPEED: Fan speed will be selected in following pressing ECO button.
PAGE 5
to adjust the figure. Setting or modification is effective only by pressing OK button to make confirmation. TIME ON: For time ON setting. Once pressing this button, the time will increase by 0.5 hour. When the set time exceeds 10 hours, pressing the button will increase the time by 1 hour.