Installation Guide

3
4) Remove the top cover first. Then
unscrew the two screws from top bracket and replace
on the other side.
5) To install the bracket on the left side of the appliance,
screw the two screws through the bracket and into the
top of the appliance. Slide the door back on to the top
hinge. Ensure the door is face up. Replace the top
cover on the top bracket by screw the two screws.
6) Screw the bottom hinge into place on the new side.
Replace the foot on the other side.
7) Check that the door is aligned horizontally and vertically
and that the seals are closed on all sides before finally
tightening the bottom hinge. Readjust the leveling feet.
2.3 Door Space Requirements
The unit's door must be able to open fully as shown.
W×D≥914mm×992mm
2.4 Levelling the Unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the door and magnetic seal alignments
will not be covered properly.
2.5 Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
W
D