Owner manual

ManualsBrandsMIDI Solutions ManualsAudioEvent Processor Plus

STOREINCOMINGVALUEINAVARIABLE

VALUERANGEANDVARIABLESPECIFICATION

ToprogramtheEventProcessorPlustostoreanincomingvalueinoneofeightvariablelocations,senditthe

followingSystemExclusiveprogrammingcommand:

followedby

AllbytesmustbeinHexadecimalformat(seehexadecimalconversiontableatend)

=settingtobeprogrammed(00-1F)

isrelatedtotheparameters asfollows:

=00: specifiestheincomingrangeofthefirstbyte# ofMIDIEventA tobeprocessed

=01: specifiestheincomingrangeofthesecondbyte# ofMIDIEventA tobeprocessed

=02: specifiestherangethefirstbyteisscaledtobeforeitisstoredinVariable (00-07)

=03: specifiestherangethesecondbyteisscaledtobeforeitisstoredinVariable (00-07)

Toprogramsetting#1tostorevolume(CC#7)onMIDIchannel5inVariable1,withtheincomingrange0-127

scaledtothestoredrange0-100,sendtheEventProcessorPlusthefollowingprogrammingcommands:

F00000502907 F7

UptotwovaluesofeachincomingandoutgoingMIDIeventcanbequalifiedbyparameters thatspecify

valuerangesorvariablestobecomparedto.IncomingMIDIeventsareprocessedonlyifeachvaluefallswithinthe

specifiedvaluerangeormatchesthevaluestoredinthespecifiedvariable.ValuesofoutgoingMIDIeventsare

scaledtothespecifiedoutgoingvaluerangesorassignedtothevaluesstoredinthespecifiedvariables.

ForincomingMIDIevents, isdefinedasfollows:

FirstvalueofincomingMIDIevent:

=00 :Valueofbyte# qualifiedbyrange

=1 0000:Valueofbyte# comparedtovariable =0to7

(ifMIDIeventisnon-SystemExclusivethen =02)

SecondvalueofincomingMIDIevent:

=01 :Valueofbyte# qualifiedbyrange

=1 0000:Valueofbyte# comparedtovariable =0to7

(ifMIDIeventisnon-SystemExclusivethen =03)

ForoutgoingMIDIevents, isdefinedasfollows:

FirstvalueofoutgoingMIDIevent:

=02 :Valueofbyte# scaledtooutgoingrange

=2 0000:Valueofbyte# assignedthevaluestoredinvariable =0to7

(ifMIDIeventisnon-SystemExclusivethen =02)

SecondvalueofoutgoingMIDIevent:

=03 :Valueofbyte# scaledtooutgoingrange

=2 0000:Valueofbyte# assignedthevaluestoredinvariable =0to7

(ifMIDIeventisnon-SystemExclusivethen =03)

Whenmultipleparametersets areusedinasingleprogrammingcommandthesetsmustappearinthe

ordershownabove.

AllbytesmustbeinHexadecimalformat(seehexadecimalconversiontableatend)

F00000502907ss(aabbxxyy)F7 "MIDIEventA"

aa bbxxyy

aa xxyy bb

Example

000103007F03000064

B40700

aabbccdd

aabbccdd bbccdd bb ccdd

aabbccdd xbb bb x

aabbccdd bbccdd bb ccdd

aabbccdd xbb bb x

aabbccdd

aabbccdd bbccdd bb ccdd

aabbccdd xbb bb x

aabbccdd bbccdd bb ccdd

aabbccdd xbb bb x

aabbccdd