User guide

NOTE

ToprogramtheRelaytorespondtoaNotemessage,senditthefollowingSystemExclusiveprogrammingcommand:

( isoptional)

AllbytesmustbeinHexadecimalformat(seehexadecimalconversiontableatend)

issetasfollows:

if isomittedthen:

=00:relayOPENSforNote-OnsandNote-Offs

=01:relayCLOSESforNote-OnsandNote-Offs

=02:relayCLOSESforNote-Ons,OPENSforNote-Offs

=03:relayOPENSforNote-Ons,CLOSESforNote-Offs

if isincludedthen:

=00:relayproducesCLOSEDpulseforNote-Ons

=01:relayproducesCLOSEDpulseforNote-Offs

=02:relayproducesOPENpulseforNote-Ons

=03:relayproducesOPENpulseforNote-Offs

=MIDINotenumber

=MIDIchannel(seeMIDIchanneltableatend)

=Pulsewidthin8msincrements,or1sincrementsifprecededby00

TheRelaywillacceptacombinedtotalof10NoteorControlChangesettings.

Toprogramtherelaytoclosefor10secondswhenNote-OnmiddleCisreceivedonanyMIDIchannel,set

(relayproducesCLOSEDpulseforNote-Ons), (middleCisNotenumber60,3Cisthehexadecimalvalue

for60), (7FspecifiesallMIDIchannels),and (0A isthehexadecimalvaluefor10,preceededby

00tospecify1sincrements).ThesevaluesresultinthefollowingSystemExclusiveprogrammingcommand:

F00000500601 F7

F00000500601aanncc(pp)F7 pp

Example

aa=00

nn=3C

cc=7F pp=000A

003C7F000A