User guide

PROGRAMCHANGE

START/STOP/CONTINUE

ToprogramtheRelaytorespondtoProgramChangemessages,senditthefollowingSystemExclusive

programmingcommand:

( )isoptional

AllbytesmustbeinHexadecimalformat(seehexadecimalconversiontableatend)

if isomittedthenrelayCLOSESforallprograms andOPENSforallotherprogramnumbers.

Otherwise, aresetasfollows:

=10:relayproducesOPENpulseforallprograms

=11:relayproducesCLOSEDpulseforallprograms

=Pulsewidthin8msincrements,or1sincrementsifprecededby00.

=MIDIchannel(seeMIDIchanneltableatend)

=Programnumbersforrelaytorespondto

NewProgramChangesettingsoverwriteprevioussettings.

Toprogramtherelaytocloseforadurationof4secondswhenprograms5,7,or12onMIDIchannel10arereceived,

senditthefollowingSystemExclusiveprogrammingcommand:

F00000502603 F7

ToprogramtheRelaytorespondtoStart,Stop,andContinuemessages,senditthefollowingSystemExclusive

programmingcommand:

( isoptional)

AllbytesmustbeinHexadecimalformat(seehexadecimalconversiontableatend)

issetasfollows:

if isomittedthen:

=00:relayCLOSESforStart/Continue,OPENSforStop

=01:relayOPENSforStart/Continue,CLOSESforStop

if isincludedthen:

=00:relayproducesCLOSEDpulseforStart/Continue

=01:relayproducesCLOSEDpulseforStop

=02:relayproducesOPENpulseforStart/Continue

=03:relayproducesOPENpulseforStop

=Pulsewidthin8msincrements,or1sincrementsifpreceededby00

ToprogramtherelaytoclosewhenaMIDIStartorContinuemessageisreceived,andopenwhenaMIDIStop

messageisreceived,senditthefollowingSystemExclusiveprogrammingcommand:

F00000502606 F7

F00000500603(aapp)ccnnnn...nnF7 aapp

aapp nn

aapp

aa nn

nnnn...nn

Example

1100040905070C

F00000500606aa(pp)F7 pp

Example