Operating Instructions

Input MIDI Data Type (aa)
00: Note range
01: Poly Pressure range
02: Control Change range
03: Prog. Change range
04: Chan. Pressure range
range xx yy selected from 00 to 7F
range xx yy selected from 00 to 05 in this table.
range xx yy selected from the System Message table (p. 17).
When a keyboard range is selected, channel messages are sent
to both the selected and original outputs. This allows messages
such as Sustain and Pitch Bend to affect notes in each range.
1
1
1
1
1
2
3
4
1
2
3
1, 4
1
Decimal Hex
Control Function
000
H Bank Select
1 01H
Modulation wheel or lever
2 02H
Breath Controller
3 03H
Undefined
4 04H
Foot controller
5 05H
Portamento time
6 06H
Data entry MSB
7 07H
Main volume
8 08H
Balance
cc specifies the MIDI channels on which the message is
mapped. cc must be set according to the following table:
Chan.
cc Chan. cc
Chan.
cc
1-
00
7-
06 13 -
0C
2-
01
8-
07 14 -
0D
3-
02
9-
08 15 -
0E
4-
03
10 -
09 16
-0F
5-
04
11 -
0A ALL - 7F
6-
05
12 -
0B
19
05: Pitch Bend range (msb)
06: Channel Message range
07: System Message range
(bb, cc ignored)
08: Keyboard range
System Message Table (used when aa = 07)
00: System Exclusive
01: Song Position Pointer
02: Song Select
03: MIDI Time Code
MIDI channels (bb and cc) are ignored for System messages.
04: Timing Clock
05: Start
06: Continue
07: Stop
17
Example: To program the Router to route all System Realtime
messages to Out2, set aa = 07 for System Message range, set xx
= 04 and yy = 07 to select the range of messages from Timing
Clock to Stop, set bb = cc = 00 (channels ignored for System
messages), and set dd = 02 for Out2. This results in the following
Sys. Ex. command:
F0 00 00 50 01 02 07 00 04 07 00 02 F7
18
21
9
09H Undefined
10 0AH Pan
11 0BH Expression Controller
12 0CH Effect Control 1
13 0DH Effect Control 2
14-15 0E-0FH Undefined
16-19 10-13H General Purpose Controllers (#’s 1-4)
20-31 14-1FH Undefined
32-63 20-3FH LSB values for 0-31
64
40H Damper pedal (sustain)
65
41H Portamento On/Off
66 42H Sostenuto
67 43H Soft pedal
22
68
44H Legato Fsw (vv=00-3F: Normal, 40-7F: Legato)
69 45H Hold 2
70 46H Sound Controller 1 (default: Sound Variation)
71 47H Sound Controller 2 (default: Timbre/Harmonic Content)
72 48H Sound Controller 3 (default: Release Time)
73 49H Sound Controller 4 (default: Attack Time)
74 4AH Sound Controller 5 (default: Brightness)
75-79 4B-4FH Sound Controllers 6-10 (no defaults)
80-83
50-53H General Purpose Controllers (#’s 5-8)
84
54H Portamento Control
85-90
55-5AH Undefined
91
5BH Effects 1 Depth (formerly External Effects Depth)
92
5CH Effects 2 Depth (formerly Tremolo Depth)
23