MIDI Solutions Router OPERATING INSTRUCTIONS
MIDI Solutions Router Operating Instructions M401-100 2012 MIDI Solutions Inc. All rights reserved. MIDI Solutions Inc. PO Box 3010 Vancouver, BC Canada V6B 3X5 www.midisolutions.
INTRODUCTION Thank you for purchasing the MIDI Solutions Router. The MIDI Solutions Router has the capability of routing selected MIDI messages to either of its two MIDI outputs. Routed messages can be rechannelized, and it is also possible to filter MIDI messages by routing them to neither output. The MIDI Solutions Router is MIDI-powered and requires no batteries or power supply to operate.
PROGRAMMING COMMANDS CLEAR SETTINGS To clear all of the Router's settings, send it the following System Exclusive programming command: F0 00 00 50 01 00 F7 It is recommended to send the Clear Settings command to the Router prior to programming the unit to ensure that all previous settings are cleared.
ROUTE SETTING To program the Router to route an incoming MIDI message to a selected output, send it the following System Exclusive programming command: F0 00 00 50 01 02 aa bb xx yy cc dd F7 All bytes must be in Hexadecimal format (see hexadecimal conversion table at end) aa = input data type: 00: Note range (xx yy selected from 00 to 7F) 01: Key Pressure range (xx yy selected from 00 to 7F) 02: Control Change range (xx yy selected from 00 to 7F) 03: Program Change range (xx yy selected from 00 to 7F) 04: C
MIDI CHANNEL TABLE The value cc in the programming commands is assigned according to the following table: MIDI Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ALL cc 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 7F MIDI CONTROL CHANGE TABLE Decimal 0 1 2 3 4 5 6 7 8 9 10 11 12-13 14-15 16-19 20-31 32-63 64 65 66 67 68 69 70 71 72 73 74 75-79 80-83 84 85-90 91 92 93 94 95 96,97 98,99 100,101 102-119 120-127 Hexadecimal 00 01 02 03 04 05 06 07 08 09 0A 0B 0C-0D 0E-0F 10-
WARRANTY MIDI Solutions Inc. warrants this product to be free from defects in material and workmanship for a period of one (1) year from date of purchase. This warranty is void if the product has been damaged by accident, misuse, alteration, unauthorized repairs or other causes not arising out of defects in material or workmanship.