OWNER’S MANUAL Please read this manual thoroughly and retain it for future reference. S4 MidiLand 4060/4060M SELF-POWERED MULTIMEDIA SPEAKER SYSTEM OWNER’S RECORD S4 MidiLand™ ™ 4060 SERIAL # © 2000 By MidiLand, Inc. All Rights Reserved. The model and serial numbers are located on the back of the subwoofer. Record the serial number in the space above for future reference.
IMPORTANT SAFEGUARDS About operating voltage Operate the unit with the appropriate voltage as indicated on the outer packaging and where power cord comes out of the AC adapter. It will be one of the following: •110V-120V @60 Hz • 220V-240V @50Hz About safety • The nameplate indicating operating voltage, power consumption, etc…is located on the AC adapter. • Unplug the unit from the wall outlet when it is not to be used for an extended period of time.
SETUP 1 Check your S4 MidiLand™ 4060 packaging for the following items: • Two (2) Satellite Speakers . • One (1) Subwoofer with integrated 60W RMS power amplifier. • One (1) CM-4 Control Module. Module • One (1) 10 Feet, 15-Pin to 15-Pin Interface Cable (subwoofer to CM-4 control module). • Two (2) 6 Feet and 8 inches, high performance Wire Speaker Cables. Cables • One (1) 4 Feet, Audio Cable w/ 3.5mm to 3.5mm stereo male connectors.
FEATURES • 60 WATT RMS INTEGRATED POWER AMPLIFIER • 6½” (165mm) SUBWOOFER • 2½” (65mm) WIDEBAND SATELLITE SPEAKERS • INTERNAL/EXTERNAL REMOTE CONTROL MODULE • COMPLETE MAGNETIC/VIDEO SHIELDING • EXTERNAL LOW-NOISE AC ADAPTER • SMALL DESKTOP “FOOTPRINT” • DYNAMIC SOUND QUALITY • PATENT PENDING CM-4 INTERFACE CONNECTIONS 3 With the power switch in the off position and the AC adapter plug not connected, refer to the instructions and illustrations below.
APPLICATIONS Illustration I-1 SUBWOOFER-REAR VIEW Keyboard/MIDI/Mixer/PA Audio Cable (supplied) 3c Computer/Sound Card Interface Cable LOUD LOUDSPEAKER SPEAKER SYSTEM SYSTEM REMOTE CONTROL 3a S4 BUS Portable stereo OUTPUT CD/Laser Disc/VCR/TV/DVD S4 MidiLand 4060 POWER IN Speaker System S/N: M D IL IA N D , N I C . SEE INSTRUCTION MANUAL Video Games 3b 3b AC adapter Illustration I-2 CONTROL MODULE INTERNAL MOUNTING * Please note that the control module may not fit into all computers.
HOW TO USE 4 After verifying that everything has been connected properly, plug the power cord into an available AC wall outlet. On the control module, set the controls as follows: • Rotate the Volume control fully couterclockwise. • Press the 3D and Mute buttons so that they are in the out position, not “engaged”. • Turn the Bass, Bass Treble, Treble and Balance to the center detent position, “12 o’clock”. Power switch 1. Push the S4 logo power switch located on the front the subwoofer. 2.
TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION Verify that the system is plugged into wall outlet and that the connection is secure. Make sure that the amplifiers power “S4 MidiLand” logo is pushed and that the green CM-4 LED and the S4 MidiLand logo is illuminated. No sound at all Turn the volume on the control module up. Turn the output level from your sound source up. Verify that your source is working properly.
SPECIFICATIONS SYSTEM TYPE: Self-Powered Multimedia Satellite/Subwoofer Loudspeaker System SYSTEM COMPONENTS: 6½" (165mm) Subwoofer (contains Integrated Power Amplifier) 2½" (65mm) Wideband Satellites (two) CM-4 Control Module Connecting Cables OVERALL ACOUSTIC FREQUENCY RESPONSE: 20 Hz to 20 kHz (+/- 3dB @ 1 Watt/1 Meter) AMPLIFIER TYPE/ DESIGN FEATURES: Class A/B Hybrid-Monolithic Design, Proprietary CM-4 Interface, UL 94V-0 Spec Printed Circuit Boards, Redundant Protection Circuits (Thermal, Short