Specifications

3. Then slide power switch to ON. Display will show “001” as program
number and the unit transmit initial program number to the equipment connected
to MIDISTART-3 immediately. When you play on the keyboard, notes and its
velocity message will be transmitted. Note number corresponding to the most
left key is 36.
BASIC OPERATIONS
PITCH BEND WHEEL
Roll upward PITCH BEND wheel to increase the pitch or roll downwards the
wheel to lower the pitch smoothly by transmitting pitch bend message ranging
of 0 to 16383. Normally, the wheel stays on its centre position, i.e. no bending.
MODULATION WHEEL
Roll upward MODULATION wheel to add modulation effect ranging of 0 to
127. When the wheel stays on its lowest position, no modulation message is
transmitted.
8