Owner`s manual

Reference Section

indicate up to four cue points. Underneath the graphic display you will find four rRadio

buttons, which have this name because old radios only allow one of their mechanic

buttons to be “pressed”. The functions of these buttons are related to the [Cue] button on

the bottom line of the screen. You have the following options here:

• Recall When selecting a cue button (in the bottom line) it recalls the saved measure

position of the corresponding cue point. The following applies for the continuous

playback: If the loop playback (loop icon on the upper left of the screen) is not

activated, the measure position jumps after the current measure to the new position. If

the loop playback is activated, the measure position will jump after going throught the

current loop to the new cue point.

At stopped playback, the song position will jump right away to the saved cue position

of the corresponding cue button.

• Set When selecting a cue button (in the bottom line) it sets a new cue point. For this,

set the desired measure position in the

Song Position field while the playback is

stopped. Afterwards, press the cue button to which you want to save the position. You

do this by pressing Set in the measure before the desired position, the cue point is then

automatically set to the beginning of the next measure.

• Edit When selecting a cue button (in the bottom line) this function recalls the keyboard

screen, where you may rename the cue point. You will find more information about

how to use the keyboard screen in chapter 9.2.1 - Functions Menu in the „Player“

Module / Entry “Patch” - on page 55.

• Clear When selecting a cue button (in the bottom line) it deletes the contained cue

point. Afterwards the following note will appear: “Cue point was cleared”. To close the

window, confirm the note with

OK.

9.31 Functions Menu in the [live] Icon

The functions menu is located on the lower right side of the screen. You will find functions there

that are related to tempo as well as loops. By selecting this entry, a menu with additional entries will

open:

9.31.1 Functions Menu in [live] Icon / Tempo Entry

This menu has only one option:

• Reset Sets the current tempo back to the tempo which is stored in the MIDI file. After you

change a tempo, use this function to return to the original one.