Owner`s manual

....
MIDI Module
111
1 Delete Routings... Removes configured routings. After selecting the function, another
menu will appear in which you may select different settings:
• Delete routings on all connectors Removes the routing on all connectors.
• Only on selected input connector Removes the routing only on the selected (in the
input selection menu configured) input.
• Only on selected output connector Removes the routing only on the selected (in the
output selection menu configured) output.
• Only in between selected in/out Removes the routing only between the MIDI
channels that are currently visible.
2 Layers When selecting this function, another menu will open where you may select a
different layer. Afterwards, the already defined routings will be valid for the layer that is
indicated in the title line. More about layers can be found in chapter 9.8 - Icon Line in the
Player / “layers” Icon - on page 66.
10.7 Icon Line in the MIDI Module / [allproc] Icon
You will find the icon line, by selecting the MIDI in the main screen, or through the MIDI key in the operation panel
on the remote controller. If you select the
allproc icon in the icon line, the following screen will open: