Owner`s manual

Reference Section
134
Please notice that after selecing this screen the synthA icon will change in the bottom line. The entry A 1-8 will be found
there. This button allows you to switch between the tracks 1-8 and 9-16. The following explanations apply for both
screens.
This screen allows you to adjust the outgoing volume of the up to 16 tracks of the first soundfont generators
(synthesizer A). If you want to follow the description at the proper MULTISTATION, notice that the third button from
left to right on the bottom line says Routing (the corresponding function will be explained later). The description is,
from the top to the bottom:
1 The upper buttons indicate the sound’s name that is used in the channel. If a MIDI file
has been loaded the track names will be displayed. Besides that, they take you to the
routing screen, which is described further below (see chapter 11.9 - Switching to the
routing screens - on page 139).
2 The mute button silences the track.
3 The knobs set the track’s position in the panorama (left versus right output), or in other
words, the distribution of the signal in the stereo field. The display 0 means very left, 100
accordingly very right.
4 The fader adjust the track’s volume. -96 dB means no audible sound and 10 dB means
maximum possible volume. As standard, the level is set to 0 dB.
11.5 Icon Line in the Mixer Module / [synthB] Icon
The icon line can be found by selecting the Mixer module from the main screen. By clicking on the synthB icon
in the icon line, the following screen will appear: