User manual

Pressing the MIXER button activates the Mixer-function (the button illumi-

nates in blue). You can use this function e.g. if you want to have quick access

to the volume during the playback of MIDI les (via the internal source of

sound) and to set the volume using the 6 FADERS. The faders are divided up

into 6 groups: DRUMS • BASS • GUITAR • KEYBOARDS • WINDS • ORCHESTRA.

Note: You cannot access the Mixer function for MP3 les.

You have the possibility to create Playlists on MP11 (see page 29). If you have

already done this, and then briey press the PLAYLIST button one time, the

button illuminates in blue and the playlists you have created will appear on

the display. Holding down the PLAYLIST button for about 2 seconds takes

you directly to the GENERAL SETTINGS -> AUTO PLAYLIST menu display.

Note: There are no playlists by default on delivery.

If you briey press the SHORT button once, the button illuminates in blue

and the songs will be played back in short form (minimum setting = 1 minu-

te). Holding down the SHORT button for about 2 seconds takes you directly

to the menu display, GENERAL SETTINGS -> SHORT TIME (see page 43). There

you can change the preset value (on delivery the default value is 1:00).

Note: If you have set MARKERS in your songs and then press the SHORT button

during the playback of those songs, MP11 rst considers the value that has been

set in GENERAL SETTINGS -> SHORT TIME, and then plays the current marker

part to the end.

If you press the WIZARD button once, the button illuminates in blue and

MP11 will use - while taking musical criteria into account - intelligent algo-

rithms, in order to create decent segues between 2 songs or 2 MARKERS. The

segues, however, do not take place until a bar, a part of a song (e.g. refrain)

or a marker part is completed, or unless there are musically harmonious

parts available. The form, in which a segue is carried out, has to do directly

with the buttons IMMEDIATE and CROSSFADE.

Note: If you press the WIZARD button in the EDIT MODE (e.g. during post proces-

sing of a MIDI le), no algorithms will run, but the WSF (Wizard Sound Function)

will be activated (see page 38).

MIXER

PLAYLIST

> see page 28

SHORT

> see page 35

WIZARD

> see page 22

In detail: Upper Control Panel