User manual

SPECIAL FEATURES: Insert-Eects

Insert-Eects

Insert eects are basically two internal audio processors. You can use them

for MIDI les in addition to MIDI-reverb and MIDI-chorus eects (in 2 MIDI

tracks of your choice per le) thus improving the sound of the MIDI le even

more.

The following Insert eects are available to you:

• Chorus

• Flanger

• Phaser, PhaserLite

• Tremolo

• Auto Wah

• Low-Fi (Low-Filter)

• DistRotary

• DistDelay

• VO Drive

• Crunch

• Dyna Amp

• R-Fier

• Metal

• Stack

• Tweed

Activating and working with Insert eects:

First, press one of the buttons ARTIST, TITLE or GENRE, and select the MIDI

song you want (= shaded in color). Then press the PLAY button to start the

playback of that song.

Continue by pressing the EDIT button (during the playback). This opens the

EDIT TRACKS window. This window lists all the tracks of the song currently

playing; in addition, the tracks that are actively being played can be identi-

ed by means of a green (blinking) point.

Next, using the DIAL or the UP/DOWN buttons, select the track of your

choice (= shaded in color), and then press the ENTER button. This opens the

MODIFY TRACK window. To assign an Insert eect to this MIDI track, press

the DOWN button and select the INSERT parameter (= shaded in color). Then

use the DIAL knob to set the Insert eect that you want, and nally press the

SAVE button (the eect you have set is now saved).

If you want to set an Insert eect for another MIDI track of the same song

(max. 2 tracks for each song), press rst the ESC button (-> opens the EDIT

TRACKS window), select the next track and proceed as described in the abo-

ve to set the eect of your choice for the 2nd track.