User manual

40
HARMONIZER
If you want to use the Harmonizer function, there are 2 alternatives
available to you: the 3-phonic Harmonizer mode and the Melody-Tracker
mode.
When you decide on one of the alternatives, you have to do the correspon-
ding setting in the HARMONIZER SETTINGS window.
To open this window, press the CONROL button (to the right of the HARMO-
NIZER button). The dierence between the two modes, and the available
conguration options are described in the following.
3-Voice Harmonizer Mode
In this mode, a 3-phonic chorus-eect is added to your vocals as soon as you
activate the HARMONIZER button (illuminates in blue). The prerequisite for
this is that your MIDI les contain a harmonic-track (many MIDI le producers
use MIDI channel 16 for this, in © M-Live MIDI les it is MIDI channel 5). You
can also connect a keyboard to the MIDI IN of MP11 and „set“ the harmonies
on your own. For that, you would have to activate the „Seq.mode“ in the MIDI
SETTINGS -> MIDI IN menu, and on the keyboard set the same MIDI chan-
nel that you have selected in the HARMONIZER SETTINGS window (see the
following description). To make the necessary congurations for the 3-pho-
nic Harmonizer, press the CONTROL button. This opens the HARMONIZER
SETTINGS window, which gives you access to the following parameters:
• Mode
For setting the Harmonizer mode
(additionally available value = Melody Tracker)
• Midi Track
For setting the MIDI channel that contains the harmonic-track in your MIDI
les, or the MIDI channel you use to send the harmonies
(via the connected keyboard)
• Volume
For setting the volume ratio between your vocals and the 3-voice Harmoni-
zer. The percentage value here indicates the volume level of the Harmonizer
vocals versus the volume level of the microphone signal: 50% = half the
level, 100% = same level, 200% = double the level
• Efx
For setting the reverb-ratio for the Harmonizer. The percentage value here
indicates the eect-ratio of the Harmonizer vocals versus the eect-ratio
of the microphone signal:
50% = half the level, 100% = same level, 200% = double the level.
The eect-ratio is also connected with what you have set for the MP11
reverb controller
• Octave
For setting the Harmonizer‘s octaving (available values: -2 to 2 octaves)
MIXER
reverbdelay
KEYBOARDS
ORCHESTRA WINDS
DRUMS BASS GUITAR
MIC
IMMEDIATE WIZARD GO TO CROSS FADE SHORT SMOOTHPLAYLIST NEXT SONG
Level
MP3
songs
UP
DOWN
Next
A/Z
search
SOUND
FX-1
ESC EDIT
MIC
KEY
SPEED
L R
PLAY
STOP
Current
Voice FX
SAVE
BRIDGE
ARTIST TITLE GENRE
Melody mute
MENU
SONG
FX-2
HARMONIZER Control
MP3 MIDI
MIC
Marker
Bar
MP3 MIDI
Enter
Loop
M
A
S
T
E
R
V
O
L
U
M
E
HARMONIZER