User manual

46
FADE CURVE
The settings that are made available on this menu window, are directly
linked to the CROSSFADE button (see page 13 -> Upper Control Panel). On
this window, you can decide on one of the 5 available (but not editable)
„Fade Curve“ congurations that:
• FAST:
For fast crossfading of all instruments.
• SLOW:
For slow crossfading of all instruments.
• DANCE:
For fast crossfading of the drums track, and slow crossfading of the other
instruments.
• RHYTHM ADJUST:
For slow crossfading of instruments with a delayed fade-in of the drums
track.
• AUTO:
If this „Fade-Curve“ is selected, MP11 automatically looks for the
most suitable crossfade.
The „Fade-Curve“ conguration currently being used, from the 5 possible
congurations, is labeled with [In Use] on the menu window. If you want to
choose a dierent setting, press the UP/DOWN buttons and conrm your
choice using the ENTER button.
• AutoBPM RANGE (0% - 25%)
You can use the DIAL to set this parameter at a value between 0% and 25%
(default value for this parameter is set at 10% on delivery).
As already described on page 24, this is the value that automatically adjusts
the speed for crossfading from the song currently playing to the next MIDI
song. MP11 analyzes in this manner, during the playback of a song, if the
dierence in speed of the song currently playing and the next song is within
the value set for „AutoBPM range“ (e.g. 10%).
And if so, the speed will be continually adapted during the crossfade to the
next song until it reaches the original speed of the next song. If the die-
rence in speed is lower or higher than the value set for the AutoBPM-range,
the next song will be played back at its original speed (without continuous
speed adjustment), so that the sense of rhythm is not spoiled too much.
Note: Changes that you make will be saved automatically as soon as you exit the
FADE CURVE window by pressing the ESC button.
MENUE OPTIONS: Fade Curve • AutoBPM