User's Manual

12
3.2 DISPLAY ICONS
The drawing below shows all of the ICONS and characters that are used to indicate radio operation. The
function of each icon will be discussed here, and again as we cover the operation and features.
LCD DISPLAY
Top row
3.2.1 PRIO
Indicates that the radio is in one of the priority scan modes.
3.2.2 6 ARROWS
There are six (6) arrows along the top of the display. The first indicates that the shift button has been
pressed. The remaining arrows indicate the active field for entering 5-Tone digits.
Center row
3.2.3 ALPHANUMERIC CHARACTERS
There are eight alphanumeric characters across the center that display channel number, channel name,
tone format, call numbers, caller ANI and other information required by the program.
Bottom Row
3.2.3 SCAN
Indicates that the radio is in one of the scan modes.
3.2.3 BUSY
Indicates that the channel is in use.
3.2.4 TX
Indicates that the radio is in the transmit mode.
3.2.5
>
Indicates that the radio is in the high power mode. If this icon is not present, the radio is in the low power
mode.
3.2.6
Indicates that DTMF or 5Tone data is being transmitted.
3.2.7
Indicates that the decoder is set and the speaker is muted.
3.2.8 AUX
Indicates an auxiliary function (future application).