User's Manual

70-3350/5445 – User’s Manual
7.2 Summary table for the command menu
The following table summarizes the functions of each sub-menu/setting available on your radio. Each sub-
menu/setting will be explained in detail, and its location can be found by referring to the last column of this table.
SUMMARY TABLE FOR COMMAND MENU
Main Menu Sub-menu Brief Description Type of command or
Value available
See Par:
Monitor
Temporary exclusion
Squelch/CTCSS/selective calling
if monitor is activated
6.6
Squelch
Squelch regulation (suppression of
background noise in standby)
Bar indicator 6.5
Power
Output power setting
Hi (high) / Lo (low)
6.7.c
Lock/Dist
Reception sensitivity attenuator
L (activated) / D (deactivated)
10.4
TlkAround
Allows for single-frequency communication at
repeater output (in case of breakdown)
if Talk Around is activated
10.5
Mic.Sens.
Regulation of microphone sensitivity
Lo (low) / Hi (high)
8.1
Scrambler
Activation of optional scrambler board (if
installed)
if the scrambler is activated
10.6
Radio Param
Int.Spkr
Off
Deactivation of internal speaker
if the speaker is deactivated
8.4
Call 1
Send fixed selective call - Call 1
Press menu/↵ to send immediately
Call 2
Send fixed selective call - Call 2
Press menu/↵ to send immediately
9.2.b
User Call
Send variable user-defined selective call
Typing variable digits on the keypad
microphone
9.2.c
Calls
Emergency
Send Emergency selective call
Press menu/↵ to send immediately
9.2.d
Scanning
Start scanning (searches for signals on
programmed channels)
Press menu/↵ to start immediately
10.1.a
Scan Esc
Temporary pause in scanning Immediate pause 10.1.c
Chan Del
Temporary exclusion of one or more channels
from scanning
Immediate exclusion with menu/↵ –
Chan Del
10.1.b
Scan
Edit List
Modification of scanning list and of priority
channel
Modified using the function keys 10.1.d
Home Chan
Rapid recall of most commonly used channel Immediate activation (no sub-menus) 10.2
Contrast
Adjustment of display contrast Bar indicator 8.2
Light
Display backlighting
On = activated, Auto = automatic,
and
Off = deactivated)
8.3
Keypad
Micr.
Activation of microphone with keypad
MK06/35-K
if MK06/35-K activated
5.3.c
Lcd&Keypad
Pad Lock
Lock keypad microphone MK06/35-K
if keypad is locked
10.3
PA
Activation of audio amplifier with external
speaker
if PA is activated
10.7
Aux.Out
Activation of auxiliary output switching
if contact is activated
10.8
Switches
Alarm
Activation of rear output connector upon
reception of a valid selective call
if alarm is activated
10.9
 The main menu Home Chan has a sole purpose of recalling the priority channel; therefore, it does not have a sub-menu.
 During the programming phase, one or more sub-menus may have been disabled and therefore not accessible. Contact your
radio network administrator for further information.
 Some functions or sub-menus may have been assigned to the F1, F2, F3, and F4/ESC function keys. Contact your radio
network administrator for further information.
Rev. 0.1 on 27 December 2004 Page 17 of 32