User's Manual

70-3350/5445 – User’s Manual
7.3 Menu diagram
Radio Param
Switches
Scan
Lcd&Keypad
Calls
menu/↵
Monitor
Squelch
Power
Loc/Dist
TlkAround
Mic.Sens.
Scrambler
Int.Spkr Off
Call 1
Call 2
User Call
Emergency
Scanning
Scan esc
Chan Del
Edit List
Contrast
Light
Keypad Micr.
Pad Lock
PA
Aux.Out
Alarm
Home chan
7.4 Meanings of display icons
Icon Meaning See par:
Monitor is activated 6.6
Signal received contains correct CTCSS/DSC
Signal received contains a valid selective call
9.1
Scanning of active channels 10.1.a
Scanning is temporarily paused 10.1.c
Home channel was called 10.2
Lock on keypad microphone MK06/35-K is activated 10.3
Talk Around function is activated 10.5
Scrambler activated 10.6
PA activated 10.7
Auxiliary output is activated 10.8
External alarm is activated 10.9
High transmission power
Low transmission power
6.7.c
Receiver sensitivity attenuator deactivated (Distant) – maximum sensitivity of receiver
Receiver sensitivity attenuator activated (Local) – reduced sensitivity of receiver
10.4
7.5 Meaning of function key icons.
Each function key is assignable. The table here below summarizes the meaning of the icons displayed once a
function key is pressed. This section not found in PDF version.
Icon Description
Sends fixed selective call - Call 1
Sends fixed selective call - Call 2
Sends variable user-defined selective call
mon Monitor is activated
Alarm is activated
scan Starts scan
Interrupts scan
Cancels a channel from the scan list
Shows the scan list
Activates PA function (public address)
Activates talk around function
Rev. 0.1 on 27 December 2004 Page 18 of 32