User's Manual

70-3350/5445 – User’s Manual
8.4 Exclusion of internal speaker
If your transceiver is connected to an (optional) external speaker, you may wish under some conditions to use only
the external speaker, and exclude the internal one. To do this:
1) Press the menu/↵ button to access the command menu, then use the buttons to highlight the Radio Param.
option.
2) Press menu/↵ to view the sub-menus available.
3) Press the
buttons until the Int.Spkr Off (deactivation of internal speaker) sub-menu is highlighted.
4) Press menu/↵ to insert the
symbol beside the appropriate option. (In other words, so the internal speaker is deactivated.)
5) Exit the sub-menu by pressing the F4/E
SC button, then press it a second time to exit the main menu and return to the standby
screen
 To reactivate the internal speaker, follow the above procedure and, at Step 3, press menu/ ↵ to delete the symbol.
 Do not disconnect the external speaker when the internal one is deactivated. You may damage the radio.
Rev. 0.1 on 27 December 2004 Page 21 of 32